Development of a model for the production of metal-powder compositions based on Co-Cr alloys by electroerosive dispersion

E. V. Ageev, L. P. Kuznetsova, Yu. A. Malneva

Abstract


The main requirement for powders for additive 3d technologies is the spherical shape of the particles. Such particles are most compactly packed into a certain volume and ensure the "fluidity" of the powder composition in the supply systems of the material with minimal resistance. The wide use of the EED method for processing metal waste into powders for the purpose of their reuse and application in additive technologies is hampered by the lack in the scientific and technical literature of full-fledged information on the effect of the initial composition, regimes and media on the properties of powders and technologies of practical application. Therefore, in order to develop technologies for the reuse of electroerosive powders and to evaluate the effectiveness of their use, complex theoretical and experimental studies are required. The aim of the work was to develop a model for the production of metal powder compositions on the basis of Co-Cr alloys by electroerosive dispersion. Based on the results of the conducted studies, it has been established that the optimum parameters for the process of obtaining powder materials by the method of electroerosive dispersion of butyl alcohol are: capacitance of discharge capacitors 48 μF, voltage on electrodes 100 V, repetition rate of pulses 120 Hz.


Keywords


Development of a model for the production of metal-powder compositions based on Co-Cr alloys by electroerosive dispersion

Full Text:

PDF

References


Wang Z, Guana K, Gaoa M. 2012 Journal of Alloys and Compounds 513 518-523.

Biamino S, Penna A, Ackelid U 2011 Intermetallics. 19 776-781.

Gu D D, Meiners W, Wissenbach K, Poprawe R. 2012 International Materials Reviews 57 133-164.

Song B, Dong S, Zhang B 2012 Materials & Design 35 120-125.

Song B, Dong S, Coddet P 2012 Surface and Coatings Technology 206 4704-4709.

Wang Z, Guana K, Gaoa M 2012 Journal of Alloys and Compounds 513 518–523.

Karlsson J, Snis A, Engqvist H, Lausmaa J 2013 Journal of Materials Processing Technology 213 2109-2118.

Safdar A, He H Z, Wei L Y, Snis A 2012 Rapid Prototyping Journal 18 401–408.

Loeber L, Biamino S, Ackelid U 2011 Solid freeform fabrication proceedings 11 547-556.

Gu D D, Meiners W, Wissenbach K, Poprawe R. 2012 International Materials Reviews 57 133-164.

Ageev E V., Shcherbakov, A. V., Novikov A.N. 2017 Journal of fundamental and applied sciences 1152-1157

Ageev E V, Altukhov, A. Y., Hardikov S V 2016 Journal of nano- and electronic physics 4 04055-1 - 04055-3.


Refbacks

  • There are currently no refbacks.




Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Revista Publicando.

Licencia de Creative Commons

 

This Content is available under licencia de Creative Commons Reconocimiento-NoComercial-CompartirIgual 4.0 Internacional.